|
|
Portluck
$65,000
"65x16.4x8.4 Halibut schooner built in Tacoma by Johnson in 1924 with Detroit V8-71 main and Twin Disc 509 gear. Detroit 2-71 aux driving 20 ton coil reefer system (spare compressor), holds approx 26 ton tuna, 3,400 gal fuel, approx 600 gal water, Aluminum trolling poles, aluminum stabilizer poles forward, two Northwest tuna pullers, 24" Nordic longline hauler, Thompson anchor winch, 1100 watt inverter, newer frig and freezer in galley and microwave, both 12 and 32volt systems with new 12v batteries, full electronics including Toshiba computer with seatemp program for tuna, Full Solas A survival gear, HMS tuna history. Asking $65,000 and solid offers are encouraged. Brokers Note: I have not been on this boat yet so have know "hands on" knowledge at this time. Owner is in his 70's and wants to retire now. Stated boat needs some cosmetics, but is mechanically sound and fishing tuna now. Pay for her in a trip as present tuna prices! Picture is not current.
-->More Info |
|
|
|
Eclipse
$65,000
67x17 (documented)Halibut schooner built in 1927 by Vadset. Detroit V8-71 main with 3 to1 Allison gear, low time(rebuilt by Newport Diesel) Detroit 2-71 driving 20KW Lima genset, with new 3 phase panel and breakers, Wagner Hydraulic power steering, all newer fuel tanks approx 2,500gal, four new AGM batteries, new TrueCharge 40amp electronic charger, new Carrier O6D compressor, titanium chiller, bronze condenser, all modern electronics including Comnav pilot, two station Hynautic engine controls, aluminum bait shed, aluminum mast, all aluminum bulwarks, scdule 80 aluminum trolling poles, all aluminum pen boards, newer 700 gal Stainless Steel water tank, 5 spool tuna gurdies made by Jerry Risley, two pinch pullers, 3 spool Simplex gurdies, Oregon Troll permit, refasten, recorked, reribbed, new keel bolts, newer breakbeams on and on. Brokers Note: This is my personal boat that I was refitting as a "retirement" tuna troller. She's a work in progress with most of the hardwork done. There is still much to do, but she'll be a dandy when done. My plans have changed so unfortunately she's available. She is also VERY economical as I burned approx 6.5 gph making 8 to 9 kts during the 6 days steaming bringing her home. Price of $65,000 is firm.
-->More Info
| |
|
|
Miss Donna
$110,000
40x14x4.5 fiberglass troller built in 1977 by Modutech Marine, with very low time 6V-92 main and Twin Disc 509 gear. New 6KW Northern Lights generator with 153hrs, 600 gal fuel, 120gal water, full modern electronics with new furuno radar and Navnet Furuno plotter, Comnav pilot with hydraulic steering, all new exhaust system on main, all new 12 and 110 wiring in interior, new bilge pumps, new Racor filters for main and genset, new deck pump, new batteries, new propeller, etc, etc, set of 4 spool Jerry Risley all stainless tuna pullers. Aluminum trolling poles. Boat is set up for tuna fishing at present time and was a charter boat previously. Brokers Note: Miss Donna has just underwent an extensive refit by knowledgeable owner who likes things done right. Machinery is all like new. Good dependable boat here.
-->More Info |
|
|
Wet & Wild
$200,000
80x22x11 Steel Heavy built(3/8"hull) Freezer boat by Rodriguez in 1978.
Economical Caterpillar D353 main with approx 5,000hrs since major overhaul by
Peterson Cat of Coos Bay. Twin Disc 521 gear. Two Detroit 3-71 gensets 30kw and 40kw.
50kw cruise genset. Two Carrier 5H40 compressors 1 new in 06'. Twin 3 fan blast units in
well insulated 50ton plus hold with aluminum hatch cover. Hydraulic steering with all new
steering rams and hoses in super clean lazerette in 07'. Full Modern electronics including
two Comnav's, two Furuno radars, two SSB's, sonar, Inmarsat, two computers with Oceaneye and
Winplot. approx. 14,000 gal fuel capacity. Excellent accommodations with full bath.
Boat presently rigged for tuna with new (06') six spool tuna gurdies and two pinch pullers
on stern. Extensive Albacore history both North, South Pacific (High Seas),
and near shore(HMS). Boat delivers High Quality tuna to Japanese buyers.
This is a very clean, well maintained, turn key, well setup"fishy" tuna boat,
but would also be adaptable to other uses requiring extreme cold/high volume
freezing capacity to -45 degrees or convert back to shrimper/ crabber/eeler.
Price is FIRM at $200,000 fully equipped for tuna with excellent history.
-->More Info |
|
|
|
Miss Stacey
$228,000
58'x17.9'x7.5' Steel crabber/shrimper built by Rysco in 1968. Detroit V8-92 coupled to Allison 4.5 to 1 gear driving 4blade bronze prop thru 3" Stainless Steel shaft. Detroit 3-71 25kw genset. Hydraulic steering and full electronics. Complete with all shrimp gear including aluminum hopper and 3 poly nets, 1 new. Crab block, insert tank, and 400 to 450 pots. Oregon shrimp permit and Oregon 300 pot crab permit. Owner may consider terms with half down. Asking $228.000
-->More Info
| |
|
|
Chikamin
$595,000
58'x19.5'x10' Fiberglass construction built by Delta Industries in 1978. Currently trawling, but owner reports easy conversion to seiner (100gpm hydraulic system). Would also make excellent crabber (tanked hold) or longliner. Caterpillar 3408 main coupled to Twin Disc 514 gear with 4.5 to 1 ratio. Owner reports all new stainless steel shafting, bearings, and engine alignment in 2005. 57"x40" three blade bronze wheel. 4045 John Deere genset new in 2006 with approx 3,000 hours. Hydraulic steering with Comnav pilot and remote. Micro Commander controls with two stations. Carrier 5H40 compressor with RSW system in tanked hold which reportedly packs 60ton squid. Two aft hatches have potential for baitwells. Air compressor, arc welder, and drill press in engine room. Full modern electronics including Wesmar sonar, Laptop with Furuno plotter software, and Furuno 64 mile radar. Stainless steel refrigerator freezer and washer/dryer onboard. Owner reports fishes tuna well and HMS tuna history included. Owner also reports many improvements thru-out and very economical operation. Asking $595,000 and owner terms may be considered with substantial down payment. Brokers Note: This one is priced right guys and I don't believe will be on the market long before sold.
-->More Info
| |
|
|
Sunset
$19,950
40'x11.6x5 wood troller built by Kettenburg Boat Works in 1948. Detroit 3-71 main with Twin Disc manual gearbox. 300 gal fuel in 2 newer tanks and 60+ gal water tank. Modern electronics including Comnav, hydraulic steering, all aluminum poles, mast, picking boom with hydro winch, hayrack, and anchor winch. All safety gear included. Extensive rebuild to fish hold area in 07' with all new ribs and fasteners. Boat comes complete with 3 spool Kolstrand gurdies and Oregon troll permit. Owner Asking $19,950 and wants her sold soon!
-->More Info
| |
|
|
Mandingo
$185,000
80'x22'x10' Steel double rigged Shrimper/Crabber/Tuna boat built in 1974. Heavy steel construction.
Economical 343 Cat main with TD514 6 to 1 gear. 20KW Isuzu genset, Immaculate engine room. Full Electronics,
Insulated & Fiberglassed fish hold, complete shrimp gear with extra nets. New galvanized steel crab davit, new
17" Northwest crab block and new 18,000lb crab tank. This is an EXCEPTIONALLY clean owner/operated, well maintained
boat, & shows pride of ownership. Would make good tender as owner reports would pack approx 170,000lbs salmon.
Owner also reports very economical operation tuna fishing of approx 100Gal. a day. Recently installed 40KW Isuzu
and Integrated Marine spray brine system. Boat with shrimp gear and WA Shrimp Permit $185,000. To sell this way must have escrow closed
prior to October 1st 2008 after which must be sold with OR 300 pot crab permit for a price of $280,000. 300 brand new Cornflakes pots available for an
additional $31,500. Also OR 300 pot crab permit available til October 1st for $95,000. Brokers note: I have fished along side this boat and have "hands on"
knowledge of her. These are also pictures I personally took and are not "stolen" from another brokers website. If you want to talk with a broker that knows the boat give me a call.
-->More Info
| |
|
|
Seamaid
$129,000
60'x14'x9' Schooner Freezer troller of heavy wood construction built in 1924 and very well maintained. Detroit V8-71 coupled to Twin Disc 509 gear turning 4" Monel shaft with 4 blade 33"x33" wheel. Owner reports approx 95 gpd fuel consumption tuna fishing. John Deere 40KW genset, Hydraulic steering with Comnav and jogstick, insulated and glassed fish hold with aluminum pen boards, and freezing racks. Dual Carrier airblast refrigeration system with brine tank on deck. These are two complete independent systems. Packs 1,600 gal fuel and 500 gal water. Large spacious wheelhouse with full galley, Captains stateroom, and shower/head. Complete modern electronic package. Aluminum poles, mast, 3 spool salmon gurdies, and two pinch pullers. Comes complete with all troll gear, Oregon troll permit, and HMS history. Brokers Note: Seamaid is an exceptionally nice clean turnkey schooner troller that shows excellent maintenance and has been updated with quality modern equipment. Pride of ownership is reflected with this boat. Many new systems. Owner must reluctantly sell due to unfortunate health problems and is asking $129,000 for complete turnkey package, but encourages solid offers.
-->More Info
| |
Sale Pending
|
|